Metalika

HomepageProducts Handling and transfer system Finger Car system and curring chamber for concrete products Handling and transfer system FINGER CAR SYSTEM

METALIKA Finger Car system is end-level of automatic concrete product manufacturing equipment.

METALIKA Finger Car system is top level automation of concrete product manufacturing lines.
On request Finger Car can lift one or two pallets per level, it can have up to 15 levels (400mm distance between levels) or up to 30 levels (200mm distance between levels).

Finge Car can be with rotation or without rotation.

METALIKA Finger car system consists of the transfer car and the finger car sitting on top. It runs fully automatic; however, all functions can be operated manually.

All drives are servo-adjusted electric gear motors with mounted-on brake.

All necessary safety features like tip over safety, rotary light and horn are in place.

The transfer car (part of the Finger Car system) is composed of a frame structure. The bearing surfaces of the four wheels are hardened. For safe positioning in front of the elevator,
lowerator and each chamber, the lower car is centered by an electro-mechanical locking. The power supply of the transfer car goes through an energy track with a traveling distance of up to approximately 65 meters. Laser controls positioning.

The finger car is composed of a frame structure with the fork mast to which the forks for receiving the manufacturing pallets are fixed. Lifting and lowering of the fork mast is executed with a hydraulic cylinder which is controlled by a current regulating valve. The travel gear is equipped with a front mounted double axel. The bearing surfaces of the six wheels are hardened. The power supply of the finger car runs through an electric cable reel with magnetic clutch up to a length of 65 m.

Laser controls the exact positioning of the pallets.

For the automatic control of all Finger Car functions the freely programmable.

Transfer and Finger car are equipped with a control cabinet that drives along.

The belonging drive inverter is mounted in the control cabinet of the transfer car.

All necessary switches, pushbuttons and signal lights are built into the control panel. It also contains the DC power supply and the PLC.

It has operating device driving of the finger car in manual operation.

Data transfer to finger car: Data light barrier

Locking down the transfer car in front of the elevator, lowerator and chambers.

Perfect solution for manufacturing concrete products without human factor in handling concrete products.

Download FINGER CAR SYSTEM Brochure

HOW IT WORKS?

DESCRIPTION FUCNCTION OF METALIKA FINGER CAR SYSTEM!

Finger Car has the task of transporting fresh concrete products from the “wet side” of the production line to the curing chamber and returning dry concrete products from the curing chamber to the “dry side” of the production line.